Launch our Cool Free App!
Get $3 Off 1st Order.
Easy Wi-Fi extension
Tired of Wi-Fi “dead zone”? Mi Wi-Fi Range Extender Pro can help you easily connect to the network.
1、Put the extender near the router, turn the power on and wait for the yellow indicator light to start flashing.
2、Scan the QR code to install the app and follow the instructions to add the device.
3、When the indicator light turns blue, pairing is complete.
Now you can simply unplug and plug the Mi Wi-Fi Range Extender Pro in a location for the best signal quality and coverage in your house, without needing to configure the extender again.
Wifi 300Mbps.Transfer speed up 300Mbps
2 External antennas.Advanced connection technology allows you to ensure reliability WiFi coverage throughout your home or office.
No dead zone.When connected to the router wirelessly, the signal is reinforced and expanded in areas where the router cannot itself.
Until 24 devices.24 devices is the maximum recommended connections for a better experience.
Flexible collocation.Once connected with a router, you can simply unplug it and plug it back into a place for better signal quality and coverage.
Easy set up.Using my home application, it is very convenient to connect with a router. Meanwhile, it's simpler when the router is my router.
Xiaomi Mi Range Extender Pro specifications:
CPU: MT7628K 580MHz
Antenna Type: 2 external antennas
Wireless Standards: IEEE 802.11b/g/n
Signal rate: 2.4GHz, up to 300Mbps
2.4GHz channel: 1, 2, 3, ., 13
Wireless Security: WPA-PSK/encryption WPA2-PSK
Power supply: 100-240V/0.35A
Why can't find an amplifier in my device?
You need to choose mainland China, then find this device, and then connect, because the amplifier is in Chiness version
What do the different colors of the indicator light mean?
The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful.
The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds.
Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network.
Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service.
Why The amplifier is always flashing orange, then the blue light is flashing?
The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed.
Please upgrade your router to the latest development or stable version (2.0 or above)
Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair
The paired amplifier appears blue flashing
Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing
How to customize the network name and password of the amplifier?
Not supported yet,
How to upgrade the firmware?
When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade;
In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client.
Why can't the amplifier get the signal from the router?
Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .